Accessories
Using UV Resistant Wavebrella Material, the marine-grade canvas provides supreme protection against the elements, and the fully-screened ends for ventilation will promote airflow while safeguarding your vessel. The canopy includes a 24-inch perimeter drape for enhanced coverage. Featuring lightweight, robust trusses secured to a rigid aluminum frame, the system’s rugged construction is crafted through a rotational molded process. The telescopic columns offer almost four feet of height adjustment, which can then accommodate a wide range of pontoons and boats. And a clean, custom look is maintained with its oxidation-resistant design, which will preserve the aesthetic appeal of the canopy.
“The ProTect’R Canopy is a game-changer in marine protection,” said Ben Feldman, director of sales at Wave Armor. “It combines cutting-edge design with durable materials, offering pontoon owners a solution that not only shields their watercraft but does so with style and adaptability.” (www.wavearmor.com)
With control at the touch of a button, Helix-P’s control system can be run from an app on your phone. Predetermined stops can be customized to your dock, and the motor’s revolution counter enables pre-programmed stopping points. Available in four sizes, the Helix-P can accommodate vessels from 8,000 to 24,000 pounds. The frame has non-slip striping for safety and the Helix-P cradle locks in the “up” position to prevent your boat from swinging in the wind.
Additional options include Storm Surge inserts that can quickly raise a boat a further 24 inches. Users can also combine up to two different hydraulic DC power packs of 6hp or 12hp to increase power up to 24hp to produce speeds 12 times faster than typical piling lifts. And a single power pack can be shared among multiple lifts or boat cover systems, offering a cost-effective and clutter-free power solution. The Helix-P lift is the sleekest, fastest piling lift system. (www.sunstreamboatlifts.com)
ShoreMaster’s sleek, aluminum pontoon is resistant to corrosion, has lighter than steel frames, and provides superior strength to lift your boat. With minimal nuts and bolts to tighten after rough seas on a windy day, using this lift will give you more time to hang out on the boat instead of the dock, and keep you from worrying about rusted and corroded hardware. Installation and assembly are also straightforward because of the minimal 8-piece design.
All of ShoreMaster’s lifts have the industry’s quietest winch system, as well as a motorized operation that can be integrated or added on. Available in three capacity options (4,000, 5,000, and 7,000 pounds), all models have a lift travel of 66 inches and come with a built-in guide system and canopy cover. (www.shoremaster.com/lifts)
The solar dock lights are available in five colors: white, blue, amber, red, and green and work with ShoreMaster’s Infinity Docks RS4, RS7, and TS9. (www.shoremaster.com)
Eliminating the hassle of ropes, snaps, or straps like traditional covers, Touchless Boat Covers are fully automated with a remote control or even an app from your phone. No longer do you have to decide if it’s worth dealing with the hassle of a traditional cover when friends show up and want to enjoy a nice sunset cruise. Simply press a button and you are on the water. After returning to dock, press a button again to recover your boat.
Built by hand in the USA, pontoon boat covers are customized to the length, width, and height of your boat, boathouse, dock, and boatlift, and are compatible with any docks/lift designs—from piling lifts to floating docks. Made from extremely durable marine grade fabric, these covers are waterproof, UV and mildew resistant, and available in 10 stock colors and 10 special order colors. (www.touchlesscover.com)
Ideal for pontoon boats, Frog Hooks’ flexible configurations keep the boat 20 to 84 inches away from the dock, which allows the engine to be up and out of the water. Made from durable, galvanized steel, each set of Frog Hooks includes a mounting bracket to attach the platform to the dock, and a key set that securely fastens the boat to the platform. Boats can be docked either stern-in or bow-in; 20-inch platforms are recommended for bow-in docking, and up to 52-inch platforms for stern docking, depending upon engine size.
Although designed for floating docks, the Frog Hooks system works not only in marinas and with private docks, but also in tidal locations, and lakes and rivers. Customers have also used Frog Hooks to secure boats to houseboats, connect seawalls and bulkheads to floating docks, or to tow docks. Built to last and made in the USA, Frog Hooks platforms are trusted by over 500 marinas. (www.froghooks.com)
The lift is manufactured for both the specific location requirements—such as length of travel and angle of installation—as well as the boat itself. Depending on the weight of the vessel, the lift can have a single, two, or four tracks, and can have up to a 60,000-pound capacity. Heavy-duty UV-rated Nylatron wheels on stainless equalizer brackets provide exceptionally smooth operation, especially with heavier vessels.
The power behind an Elevator Lift lies in the reliable Golden Sea-Drive. Incredibly safe, it simply cannot back drive and accidentally drop. Each unit provides 8,000 pounds of torque. Important for a vessel of any weight, custom bunking on the Elevator Lift ensures the hull is fully supported and doesn’t cause strain. Carpeted wood or optional aluminum bunks adjust to accommodate a wide range of shapes such as deep-V, steps and/or strakes, as well as inboard and outboard power. (www.goldenboatlifts.com)
Made with the highest quality materials, bumpers come in black or gray reinforced .90mm PVC, and the finished material is coated 1000 denier polyester. Each bumper has two stainless steel D-rings (one on each end of the bumper) with enhanced webbing connectors on the ends to connect to your dock or other boats. All fenders have H3 quick inflation and deflation valve & pump nozzle and are PSI rated at 3.5; PSI tested up to 42 pounds of pressure.
Available in multiple sizes and both 8- and 24-inch diameters, the 2- and 4-foot fenders are great for boat tie-ups, and the 6- and 12-footers are perfect for docks and marinas. It’s important to note that Big Bumpers are not approved flotation devices and should never be used as a floating step. However, they can safely be used for anchoring, docking, and boat-to-boat tie-ups, and can be positioned either horizontally or vertically to suit your needs. (www.bigbumpercompany.com)
Made from lightweight, rust-proof aluminum, this ramp has a 600-pound weight capacity and is available in two sizes up to 7.5 feet long. Simple to install, the ramp comes with all required mounting hardware with universal mounting brackets to fit most pontoon boat models. The ramp easily stores under the deck of your boat to slide out when needed.
Passengers worried about mobility, or who have large or small dogs, will find the ramp comfortable and safe to use. The non-slip surface is fine-grained, so even bare feet can tread comfortably.
Customers have appreciated the ample width of the ramp and wheels on the end that make rolling it out simple and efficient. (www.discountramps.com)